Comp-cams COMP4-102 User Manual download pdf

COMP Cams®

3406 Democrat Rd.

Memphis, TN 38118

Phone: (901) 795-2400 Fax: (901) 366-1807

www.compcams.com

Part # COMP4-102

Revised 7/10/06

Camshaft Installation and Degreeing Instructions

4.6-Liter 4 Valve Engines

Thank you for choosing COMP Cams® products; we are proud to be your manufacturer of choice. Please read

this instruction sheet carefully before beginning installation, and also take a moment to review the included

limited warranty information.

This instruction sheet is broken down into several categories for ease of use. Some of the topics may not apply

to every application, but all of the information will be very beneficial during the cam installation process. If

there are any questions or problems during the installation, please do not hesitate to contact the toll free CAM

HELP® line at 1-800-999-0853, 7 a.m. to 8 p.m. CST Monday through Friday.

Camshaft Installation

Step 1: Prepare a clean work area and assemble the tools needed for the camshaft installation. The use of an

automotive manual is strongly recommended for help in determining which components must be removed from

your engine in order to expose the camshafts, camshaft sprockets and timing chain assembly. A good, complete

repair manual will save both time and frustration during the installation of your new camshaft set.

Step 2: Remove the intake manifold and valve covers from the motor.

Step 3: Remove spark plugs, crank pulley, damper and engine front cover.

Step 4: Remove the primary timing chains and outer camshaft sprockets.

Step 5: Remove the secondary timing chain assemblies after relieving the tension on the secondary drive

assembly by depressing the plunger and inserting a pin to lock it in place.

Step 6: Rotate the crankshaft keyway counterclockwise 90° from 12 o’clock (to about the 9 o’clock position).

Note that this step is vital in order to avoid contact between the pistons and valves while rotating the cams for

the purpose of rocker arm removal.

Step 7: Rotate the camshaft so that the heel of the cam lobe is positioned over the rocker arm that you wish to

remove. Using the appropriate rocker arm service tool, compress the valve spring and remove the rocker arm.

Repeat this process until all of the rocker arms have been removed.

Step 8: Once all of the rocker arms have been removed, unbolt and remove the cam towers. Be sure to keep

track of the order in which you removed the cam tower caps and cap bolts, as they are not all the same size.

Step 9: Remove the old camshafts. Liberally coat your new COMP Cams® camshafts with the supplied

assembly lube. It is a good idea to use an additional bottle of lube, available from COMP Cams® (Part #152) in

order to ensure that you have enough lubricant for a proper installation. This is very important as (unlike a

conventional small block) pre-lubing the modular motor is difficult without some type of pressurized external

oiling system.

Step 10: Tighten all of the cam tower bolts using factory torque specification and tightening sequence. Verify

that each camshaft spins freely without binding (note that slight resistance to turning is normal).

INSTRUCTIONS

1 2 3 4

Summary of Contents

Page 1 - INSTRUCTIONS

COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part # COMP4-102 Revised 7/10/06

Page 2

COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part # COMP4-102 Revised 7/10/06 Step 11:

Page 3 - Intake Centerline Method

COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part # COMP4-102 Revised 7/10/06 Intake Ce

Page 4

COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part # COMP4-102 Revised 7/10/06 Step 10:

Comments to this Manuals

No comments

Comp-cams COMP4-102 User Manual

Browse online or download User Manual for For the car Comp-cams COMP4-102. COMP Cams COMP4-102 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Comp-cams COMP4-102